Decorative plaster is widely used whendecoration of premises. For many years it has been used both for internal works and for external ones. It has wear-resistant properties, water resistant, after applying to the surface, forms a strong layer. This type of finishing material allows you to use many different design solutions, gives the room texture and original color design. A variety of drawings on the surface are applied using rollers for decorative plaster. Having studied the technology, it is not difficult to make the finishing with such material. It can be done independently without attracting expensive professionals.
Before learning how to apply different ornamentson a layer of decorative plaster, it is necessary to become more familiar with this material. It is a particularly strong coating, which includes certain fillers. For example, pebbles, marble, granite, mica, quartz, wood fiber. Necessarily in the composition of such a solution there are polymeric and acrylic substances, they are responsible for the binding functions. Thanks to them the plaster acquires elasticity and sets after a certain period of time. It is quite enough to apply an ornament to the surface using texture rollers.
There are two main types of decorative plaster:
Features of this material allow you to create a unique and original relief on the surface. Each of them corresponds to a certain type of rollers. Consider the most common of them:
In order to apply the necessary relief to the surface of decorative plaster, the main thing is to correctly pick up the platen.
Very beautiful looks natural ornament onplastered wall. In order to create it, it is enough to use a relief roller and a not very thick solution. Apply the mixture with progressive movements, observing the chosen direction, which in the future is not recommended.
It is much more complicated with complexartistic patterns. Of course, there are rollers for decorative plaster with certain reliefs. However, it is impossible to use the above-described technology, since in some places the mixture will be superimposed in a very thick layer, and other areas will remain without the finishing material altogether. In this case, the most relevant is first to apply the plaster with a spatula, and only after that go for a curly roller. Speed, force of pressure and direction of movement should be the same throughout the site. After carrying out the first strip, all subsequent ones are performed back to back, overlaps and indents are not allowed.
Rollers for textured plaster can be purchasedin any construction shop. However, if there is a desire to give the finish a truly individual and unique look, then such a tool can be made independently. For these purposes, a wallpapered rubber roller, thick tourniquet, rubber or leather strips (sometimes you can use ordinary erasers) and glue are perfect.
Leather or other materials described aboveit is necessary to cut out some figure. Its form is chosen individually. You need to stick the pieces at a certain distance, so that a distinct relief appears on the surface of the plaster. It is desirable to decorate the edges of the nozzle as closely as possible, so that when working with a roller there is no difference between the sides.
So, let's get acquainted with the detailed technology of applying ornaments on the surface of the plaster.
Rollers for decorative plaster - not the only tool for drawing drawings on the surface. For this purpose, you can use a foam sponge, a brush, a stiff brush, a coarse cloth.
With the help of platens for decorative plaster, you can give the room an original and unique design. Do not be afraid to experiment and make non-standard decisions.
</ p>