How to make a gate from corrugated board

The gate has always been regarded as a person not only at home, butand his master. If they were beautiful, and at the same time sturdy, then the owner of the house was treated with respect, appreciating his strength and diligence. Particularly valued products made of wrought iron or expensive wood.

Nowadays, forged or oak gates arenot cheap, so many owners of private homes tend to make them independently from inexpensive material. Especially popular are the gates made of corrugated board. Photos of such designs can be found in a huge number on the Internet. At the same time, there is a special technology for applying an image to this type of material, which makes a real piece of art from a regular metal sheet.

The gates made from corrugated board are made with their own hands quite simply. However, for such a process, you will need a welding machine, a drill and a screwdriver, as well as skills to handle this tool.

To begin with, it is necessary to determine whichtype of door should be made. Usually these are standard opening gates, which consist of two separate gates, but you can also often find gates made of corrugated board that move along the wall, opening the entrance. From this choice will depend on the size of manufactured products, their purpose and quantity. For sliding doors, door hinges will be needed that can withstand heavy weight, and for sliding gates, special guides are required that are fixed to the floor and wall. These parts must be installed only after manufacturing the doors themselves, making preliminary calculations.

First of all, it is necessary to make metalframe, which will be attached to the profile sheet. It is made with the help of a corner, which is welded together, observing the planned size. In this case, it should be borne in mind that the gates made from corrugated board have an uneven structure in the form of ribs, which means that it is necessary to calculate the frame so that it can then be fastened on it with a metal self-tapping screw. Also, do not forget about the ribs of stiffness, which will not allow the whole structure to bend or to warp.

After manufacturing the frame, the future gateProfiled sheeting. This is necessary in order to avoid the occurrence of rust in the place of adherence to the galvanized coating of the metal corner or profile. When the whole structure dries, a sheet of corrugated sheet is mounted on it. In this case, if it has a certain pattern or color, you should use special screws with hats of a certain color.

After this, the gates from the corrugated board are mounted on thethe device that drives them. In this process, it is necessary to observe special care so as not to damage the front part. You should also use machine oil or salt for initial filling of all cavities of friction parts and assemblies.

The installed gates can be painted again to improve their protection from environmental influences. Especially this applies to elements made of a metal profile or corner.

</ p>